EN71-1 Dynamic Stability Testing Equipment , PLC Control Toys Impact Testing Machine

PLC Control EN71-1 Toys Testing Equipment for Dynamic Stability Test Impact Test

Application:

Dynamic stability test

Adjust the seat to its highest position.Place walkers,place weight A on the seat vertically,fix it with a light object to prevent it moving.Drive the walkers hit the rigid block whose height is 40mm.at a speed of 2m/s +/- 0.2m/s. Then observe sample.

Impact test

Place walkers,place weight A on the seat vertically,fix it with a light object to prevent it moving.Drive the walkers hit a 20 mm thick plywood or a wall made of similar material.

Technical parameters:

1. control system: PLC,touch screen display the impact velocity and impact kinetic energy, test times

2. imported servo motor, speed from 0 - the biggest only need 0.3 seconds

3. Weight model: 15 kg (cart, electric vehicles) ,12 kg (walker)

4. Step height:

50 mm high inelastic steps (children's electric cars)

40 mm high block (walker)

5. Rigid wall: thickness of 20 +/-0.5 mm (walker)

6. Test platform: 6000 x1000mm(L*W)

7. servo motor speed double closed loop control, ensure that the impact velocity is constant, accurate

8. weight specific protection device, ensure the weight not overturned

9. Power :AC220V ,50Hz

Standards:GB14749-2006 5.9,ASTM F977,EN1273,ANSI315.1 etc

GB14746.pdf

sharp point tester

tesla gauss meter

EN71-1 Dynamic Stability Testing Equipment , PLC Control Toys Impact Testing Machine Images